Brand: FUJIFILM
MODEL: LINK 2 WHITE
FujiFilm instax Mini Link 2 Smartphone Printer - Clay White
Store finder
Creativity is in the AiR
Draw in the air with instax AiR!
Direct the LED light on the side of the printer at your smartphone and move the printer around in the air to write or draw and let your creativity flow! Add an effect to create your own special print.
Easy & Continuous
High-Speed Printing Use the free downloadable instax mini Link App to easily print multiple images right from your Smartphone in only 15 seconds (film development time approximately 90 seconds)! You can even print your favorite still from a video!
Print images shot with a digital camera on the spot!
The FUJIFILM X-S10 can send your photos directly to the instax mini Link 2 Smartphone Printer.
Free 1-year manufacturer’s warranty
Creativity is in the AiR
Draw in the air with instax AiR!
Direct the LED light on the side of the printer at your smartphone and move the printer around in the air to write or draw and let your creativity flow! Add an effect to create your own special print.
Easy & Continuous
High-Speed Printing Use the free downloadable instax mini Link App to easily print multiple images right from your Smartphone in only 15 seconds (film development time approximately 90 seconds)! You can even print your favorite still from a video!
Print images shot with a digital camera on the spot!
The FUJIFILM X-S10 can send your photos directly to the instax mini Link 2 Smartphone Printer.
Technical Specifications: | |
|---|---|
| Recording method: | 3-color exposure with OLED |
| Film used: | FUJIFILM INSTAX Mini Instant Film (sold separately) |
| Image size: | 2.4 in × 1.8 in / 62 mm × 46 mm |
| Exposure pixel count: | 800 × 600 dots |
| Exposure resolution: | 12.5 dots/mm (318 dpi, 80 μm dot pitch) |
| Exposure gradation: | RGB gradation of 256 colors |
| Interface: | Bluetooth Ver. 4.2 (BLE) |
| Printable image format: | JPEG, PNG, HEIF, DNG |
| Printing time: | Image recording - photo output (fed out): Approximately 15 sec. |
| Possible number of printed images | Approximately 100 (from full charge; number of prints depends on usage conditions) |
| Power supply: | Lithium ion battery (internal type: not removable) |
| Charging time: | Approximately 80 to 120 minutes (depending upon environment temperature at time of charging) |
| Power consumption: | Approximately 3 W |
| Operating environment: | Temperature: +41 ºF to +104 ºF (+5 ºC to +40 ºC ) Humidity: 20% to 80% (no condensation) |
| Main unit dimensions | 3.6 in × 1.4 in × 4.9 in / 91.9 mm × 36.4 mm × 124.8 mm (excluding projecting parts) |
| Main unit mass: | Approximately 0.46 lbs / 210 g (excluding film pack) |
| Supplied accessory: | Micro USB cable ( BOD700-200, Length: 11.8 in / 30 cm ) |