Brand: JIM DUNLOP
MODEL: M133
Jim Dunlop Micro Amp Pedal
Store finder
The Micro Amp allows you to boost your signal with a preset amount of gain up to +26dB.
This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).
Directions:
- Run a cable from your guitar to the Micro Amp’s INPUT jack and run another cable from the Micro Amp’s OUTPUT jack to your amplifier.
- Start with the control at 12 o’clock.
- Turn the effect on by depressing the footswitch.
- Rotate the GAIN knob clockwise to increase amount of signal boost or counterclockwise to decrease it.
Input Impedance 1 MΩ
Output Impedance 470 Ω
Maximum Output Level +6 dBV
Noise Floor* -80 dBV
Gain Control +0.5 dB to +26 dB
Freq. Response 20 Hz to 20 kHz,
+0 dB, -1.4 dB
Bypass Hardwire
Current Draw 2.5 mA
Power Supply 9 volts DC
The Micro Amp allows you to boost your signal with a preset amount of gain up to +26dB.
This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).
Directions:
- Run a cable from your guitar to the Micro Amp’s INPUT jack and run another cable from the Micro Amp’s OUTPUT jack to your amplifier.
- Start with the control at 12 o’clock.
- Turn the effect on by depressing the footswitch.
- Rotate the GAIN knob clockwise to increase amount of signal boost or counterclockwise to decrease it.
Input Impedance 1 MΩ
Output Impedance 470 Ω
Maximum Output Level +6 dBV
Noise Floor* -80 dBV
Gain Control +0.5 dB to +26 dB
Freq. Response 20 Hz to 20 kHz,
+0 dB, -1.4 dB
Bypass Hardwire
Current Draw 2.5 mA
Power Supply 9 volts DC