Jim Dunlop MXR M117R Flanger Guitar Pedal

The MXR Flanger creates a variety of wild sounds from dynamic jet plane or cool space effects to short delay, chorus and vibrato.

This pedal can be powered by two 9-volt batteries, a 18-volt adapter or the DC Brick, Iso-Brick and Mini Iso-Brick power supplies.

Directions:

1. Run a cable from your guitar to the Flanger’s INPUT jack and run another cable from the Flanger’s OUTPUT jack to your amplifier.
2. Start with all controls at 12 o’clock.
3. Turn the effect on by depressing the footswitch.
4. Rotate the MANUAL control clockwise to emphasize higher frequencies or counterclockwise to emphasize lower frequencies.
5. Rotate the WIDTH control clockwise to increase the intensity of the time delay as set by the SPEED control or counterclockwise to decrease it.
6. Rotate the SPEED knob clockwise for a faster phase effect or counterclockwise for a slower phase effect.
7. Rotate the REGEN. control clockwise to increase the overall intensity of the effect or counterclockwise to decrease it.

Input Impedance 470 kΩ
Output Impedance 1 kΩ
Max Input Level 5 dBV
Max Output Level 5 dBV
Noise Floor* -98 dBV
Noise Reduction 2:1 ratio
Max Delay 12.8 ms
Rate Range 0.1 Hz to 10 Hz
Current Draw 39 mA
Power Supply 18 volts DC