Brand: LAB GRUPPEN
MODEL: E10:4
Lab Gruppen E 10:4 1000 Watt Amplifier with 4 Flexible Output Channels for Installation Applications
Store finder
Small in Size, Huge in Benefits
Building on Lab Gruppen's touring reputation for sonic excellence and rock-solid durability, E Series brings a competitive edge to the installation market by adding ultra-compact size, high operating efficiency, output configuration flexibility, and an unprecedented cost-benefit ratio.
At the heart of E Series is Lab Gruppen's IDEEA (IntelliDrive Energy Efficient Amplifier) technology. Based around a patented Class D variant output stage, IDEEA produces high power levels with very low distortion while drawing minimal mains current.
Lab Gruppen's proprietary Rail Sensing Limiter (RSL™), also exclusive to E Series, greatly reduces signal clipping to ensure high quality audio output at all times. User configurable for Hi-Z (70 V) or Lo-Z, RSL senses rail voltages and optimizes each output for instantaneous load conditions. RSL settings also facilitate asymmetric loading of the channels to optimize performance and efficiency. Total available output power can be allocated among the channels as required by the application. This makes it possible, for example, to drive a small sub on one channel, a number of 70 V ceiling loudspeakers on the second channel, and a pair of full-range low impedance loudspeakers on the two remaining channels.
Small in Size, Huge in Benefits
Building on Lab Gruppen's touring reputation for sonic excellence and rock-solid durability, E Series brings a competitive edge to the installation market by adding ultra-compact size, high operating efficiency, output configuration flexibility, and an unprecedented cost-benefit ratio.
At the heart of E Series is Lab Gruppen's IDEEA (IntelliDrive Energy Efficient Amplifier) technology. Based around a patented Class D variant output stage, IDEEA produces high power levels with very low distortion while drawing minimal mains current.
Lab Gruppen's proprietary Rail Sensing Limiter (RSL™), also exclusive to E Series, greatly reduces signal clipping to ensure high quality audio output at all times. User configurable for Hi-Z (70 V) or Lo-Z, RSL senses rail voltages and optimizes each output for instantaneous load conditions. RSL settings also facilitate asymmetric loading of the channels to optimize performance and efficiency. Total available output power can be allocated among the channels as required by the application. This makes it possible, for example, to drive a small sub on one channel, a number of 70 V ceiling loudspeakers on the second channel, and a pair of full-range low impedance loudspeakers on the two remaining channels.
| Number of amplifier channels: |
| 4 | Total output all channels driven: |
| 1000 W | Peak output voltage per channel: |
| 100 V / 70 Vrms | Max. output current: |
| 14 Arms | Max output power (all channels driven) |
| 2 ohms: |
| N.R. | 4 ohms: |
| 250 W | 8 ohms: |
| 250 W | 16 ohms: |
| 250 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 125 W) | 70 V: |
| 250 W | 100 V: |
| Can deliver 250 W to a 100 V load tapped at 500 W | Performance |
| THD 20 Hz - 20 kHz at 1 W: |
| <0.1% | THD at 1 kHz and 1 dB below clipping: |
| <0.05% | Signal to Noise Ratio: |
| >112 dBA | Channel separation (Crosstalk) at 1 kHz: |
| > 70 dB | Frequency Response: |
| 2 Hz - 40 kHz | Input impedance: |
| 20 kOhm | Common Mode Rejection (CMR): |
| 50 dB | Output impedance: |
| 25 mOhm | Gain, Sensitivity and Limiters |
| Limit and gain switch defining limit and gain (per channel): |
| 2 pos: Lo-Z and 70 V | VPL for 70 V mode: |
| 100 V | VPL for Lo-Z mode: |
| 63.2 V | Sensitivity for stated power into 8 Ohm in Lo-Z mode: |
| 4 dBu | Sensitivity for 70.7 V out in 70 V mode: |
| 4 dBu | Sensitivity for stated power into 4 Ohm in Lo-Z mode: |
| 1 dBu | Sensitivity for stated power into 16 Ohm in 70 V mode: |
| 3 dBu | Gain in 70 V mode: |
| 35.2 dB | Gain in Lo-Z mode: |
| 31.2 dB | Level adjustment (per channel): |
| Rear panel potentiometer, from -inf to 0 dB |