الماركة: TURBOSOUND
نموذج: IQ15B
Turbosound iNSPIRE iQ15B 1000W 12 inch Powered Subwoofer
أداة العثور على المتجر
The 3,000-Watt iQ15B is a front loaded 15" powered subwoofer ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The high excursion 15" low frequency driver with double suspension low mass 4" voice coil provides fast and accurate transient response for virtually distortion-free operation – even in the most demanding performances.
Equipped with a very efficient and lightweight Klark Teknik Class-D power amplifier, the iQ15B provides an impressive 3,000 Watts of output power. A high degree of control over the loudspeaker system's performance is managed by a sophisticated, but easy to use Klark Teknik Digital Signal Processor (DSP), which provides dynamic EQ and transparent limiting for the utmost punch and definition at high output levels – and long-term reliability. iQ15B's advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry's most-respected speaker systems.
- Front loaded powered subwoofer for portable PA and installation applications
- 3,000 Watt power featuring Klark Teknik Class-D technology
- Klark Teknik Digital Signal Processing for total system control
- Speaker modelling includes accurate models of industry standard speakers
- ULTRANET digital audio networking connects to mixers and other sources
- High excursion 15" low frequency driver with 4" voice coil and double suspension
- Fully featured user interface with LCD display for ease of navigation
- PC remote control software downloadable at turbosound.com
- Birch plywood enclosure with hard wearing semi matt black paint finish
- Rugged powder coated perforated steel mesh grille
- 35 mm pole mount to support satellite speaker
- Plated steel castors with rubber tyres
- Mains input and link output on Neutrik powerCON* connectors
The 3,000-Watt iQ15B is a front loaded 15" powered subwoofer ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The high excursion 15" low frequency driver with double suspension low mass 4" voice coil provides fast and accurate transient response for virtually distortion-free operation – even in the most demanding performances.
Equipped with a very efficient and lightweight Klark Teknik Class-D power amplifier, the iQ15B provides an impressive 3,000 Watts of output power. A high degree of control over the loudspeaker system's performance is managed by a sophisticated, but easy to use Klark Teknik Digital Signal Processor (DSP), which provides dynamic EQ and transparent limiting for the utmost punch and definition at high output levels – and long-term reliability. iQ15B's advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry's most-respected speaker systems.
- Front loaded powered subwoofer for portable PA and installation applications
- 3,000 Watt power featuring Klark Teknik Class-D technology
- Klark Teknik Digital Signal Processing for total system control
- Speaker modelling includes accurate models of industry standard speakers
- ULTRANET digital audio networking connects to mixers and other sources
- High excursion 15" low frequency driver with 4" voice coil and double suspension
- Fully featured user interface with LCD display for ease of navigation
- PC remote control software downloadable at turbosound.com
- Birch plywood enclosure with hard wearing semi matt black paint finish
- Rugged powder coated perforated steel mesh grille
- 35 mm pole mount to support satellite speaker
- Plated steel castors with rubber tyres
- Mains input and link output on Neutrik powerCON* connectors
| Frequency response: |
| 50 Hz – 130 Hz ±3 dB |
| 40 Hz – 130 Hz -10 dB |
| Nominal dispersion: |
| Half Space |
| Maximum SPL: |
| 130 dB peak |
| Crossover type: |
| Active |
| Transducers: |
| 1 x 15" (385.7 mm) LF driver |
| Limiter: |
| Peak and rms |
| Amplifier |
| Maximum output power*: |
| 3,000 W |
| Type: |
| Class-D |
| Protection: |
| Short circuit, open circuit, thermal |
| Connectors |
| Input A / B: |
| 2 x combo jack/XLR |
| Sensitivity: |
| Line +4 dBu |
| Input impedance: |
| 20 kO unbalanced, 40 kO balanced |
| Maximum input level: |
| +21 dBu |
| Output A / B: |
| 2 x XLR Linked to input |
| Mix output: |
| N/A |
| Output impedance: |
| N/A |
| Ultranet input/link: |
| 2 x RJ45 |
| Mains Supply: |
| Neutrik powerCON input 20A and link 15A |
| Controls |
| DSP: |
| Rotary push-encoder |
| Buttons for PROCESS, SETUP, EXIT, ENTER |
| Mixer section: |
| 1 x gain controls (channels A and B) |
| 2 x Line |
| User DSP Functions |
| Factory EQ presets: |
| Positioning, Sound mode |
| Display: |
| LCD 128 x 32, blue backlit |
| Delay: |
| 0 - 300 ms |
| Equalisation: |
| High and low shelving EQ |
| 2 x parametric EQ |
| Limiter: |
| Zero attack input limiter |
| Presets: |
| 20 total presets, 19 user-defi nable |